Tc-electronic Nova System Uživatelský manuál stáhnout pdf (Strana 17)

MENU - PEDAL

Master

If an expression pedal is connected to the pedal input

and a preset is recalled, NOVA System can be set up to

respond to either the current position of an expression

pedal or to the value stored with the preset.

Preset:

The parameter value stored as part of the preset

applies – regardless of the current position of the

expression pedal.

Pedal:

The position of the expression pedal is identified

at the moment of preset change, and the value stored as

part of the preset is discarded.

Type

Select between either Expression or G-Switch depending

in the type of switch you have connected to the Pedal

input. Expression pedals must be calibrated (see below).

When a G-Switch is connected and selected as pedal

type the G-Switch is used to change presets and all 8

switches on the NOVA System are used as “stomp

on/off” switches.

Calibrating to an expression pedal

In order to secure the best performance of your

expression pedal, NOVA System must be calibrated to

this pedal. Follow this step by step guide.

• Make sure that you have connected your pedal to the

pedal connector on the rear panel

• Select “Calibrate from the Pedal Menu

• Press MENU

• The LCD now reads

• Place your pedal in minimum position (“Heel down”)

and press MENU

• The LCD now reads

• Place your pedal in maximum position (Toe down)

and press MENU

• The LCD reads: “CALIBRATION DONE”

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

Žádné komentáře

Tc-electronic Nova System Uživatelský manuál Strana 17